CyberDrone – DJI FPV Complete Conversion Kit — Preorder
CyberDrone – DJI FPV Complete Conversion Kit — Preorder
Couldn't load pickup availability
PREORDER — Estimated dispatch: December 1, 2026
Initial fulfillment is available within Europe.
For orders outside Europe, please contact evolutiondrones.us@gmail.com or message @evolution.drones on Instagram to discuss availability and shipping options.
Reserve your CyberDrone Complete Conversion Kit with a 50% deposit at checkout. The listed kit price excludes VAT, which is calculated and added at checkout. The remaining balance is due November 30, 2026, before the estimated dispatch on December 1, 2026. Shipping is additional, quoted separately for your approval and payable before dispatch.
This kit is available to preorder and is not ready for immediate shipment. The dispatch date is an estimate, not a delivery date.
Transform Your DJI FPV. Make It Yours.
The CyberDrone Complete Conversion Kit by Evolution Drones combines the precision-cut carbon fiber components, assembly hardware and custom 3D-printed parts required to build the CyberDrone frame for the original DJI FPV Drone.
Rather than simply replacing the factory shell, CyberDrone rebuilds the aircraft around a custom carbon fiber structure while allowing builders to reuse compatible components from their original DJI FPV Drone.
Carbon fiber and hardware are packaged together, with the 3D-printed components packaged separately. Both packages are included in this complete kit.
What's Included
Carbon Fiber Components
The CyberDrone frame combines 2 mm and 3 mm carbon fiber components to create the main structural chassis of the conversion.
| Carbon Fiber Component | Thickness | Qty |
|---|---|---|
| Side Plates | 3 mm | 2 |
| Upper Top Plate | 3 mm | 1 |
| Upper Stack Plate | 3 mm | 1 |
| Front Plate | 2 mm | 1 |
| Bottom Bracket | 3 mm | 1 |
| Bottom Plate | 3 mm | 1 |
| Total Carbon Fiber Parts | 7 |
Assembly Hardware
The kit includes the following hardware for assembling the CyberDrone frame.
| Hardware | Specification | Qty |
|---|---|---|
| M3 Standoffs | 45 mm | 5 |
| M3 Standoffs | 15 mm | 24 |
| M3 Bolts | 6 mm | 14 |
| M3 Bolts | 20 mm | 12 |
| M3 Bolts | 25 mm | 12 |
| M3 Button Washers | Flat Button Head | 24 |
| M3 Press Nuts | M3 | 12 |
| M3 Brass Heat-Set Inserts | M3 | 4 |
The M3 press nuts are used with the appropriate carbon fiber components, including the Upper Stack Plate and Bottom Plate. The M3 brass heat-set inserts are used where required during assembly of the CyberDrone conversion.
3D-Printed Components
These custom mounting, structural and body components are designed specifically to integrate the original DJI FPV hardware with the CyberDrone carbon fiber frame.
| 3D-Printed Component | Qty |
|---|---|
| Front Canopy | 1 |
| Top Canopy | 1 |
| Bottom Sensor Mount | 1 |
| Rear Power Mount | 1 |
| Arm Inserts | 4 |
| Arms | 4 |
| FC Stack Pads | 2 |
| Total 3D-Printed Parts | 14 |
Built for the Original DJI FPV
CyberDrone was developed specifically around the original DJI FPV Drone.
The carbon fiber structure and custom printed components work together to create a distinctive chassis while retaining compatibility with the applicable original DJI FPV components.
The printed components are purpose-built for the CyberDrone conversion and are not intended as direct replacement parts for the factory DJI FPV airframe.
What Is Not Included
This listing includes the CyberDrone carbon fiber components, assembly hardware and 3D-printed parts specified above.
The following are not included:
-
Original DJI FPV Drone
-
Motors
-
Propellers
-
Battery
-
Flight electronics
-
Camera and video system
-
Other original DJI FPV components
This is a conversion kit, not a complete or ready-to-fly drone. A compatible original DJI FPV donor drone is required to supply the components needed to complete the aircraft.
Compatibility
Compatible with:
Original DJI FPV Drone when used as part of the Evolution Drones CyberDrone conversion.
Not compatible with:
DJI Avata, DJI Avata 2, or other DJI aircraft unless specifically stated.
Preorder and Payment Information
-
Kit price: As displayed on the product page, excluding VAT
-
Deposit at checkout: 50%, with applicable VAT calculated at checkout
-
Remaining balance: As shown at checkout, due November 30, 2026
-
Estimated dispatch: December 1, 2026
-
Shipping: Additional, quoted separately for your approval and payable before dispatch
Your deposit forms part of the total kit price and is not an additional charge. Shipping is not included in the kit price.
Orders will be dispatched once the kit is ready and the remaining balance and agreed shipping charges have been paid. The estimated dispatch date is not a guaranteed delivery date.
Important Information
CyberDrone is intended as an aftermarket modification for experienced drone builders. Installation requires disassembly and modification of the original DJI FPV Drone.
Minor surface characteristics and layer lines are normal with 3D-printed components and do not necessarily indicate a manufacturing defect.
Modification of your DJI FPV Drone may affect manufacturer warranty coverage. Builders are responsible for proper assembly, installation, testing and safe operation of the finished aircraft.
CyberDrone is an aftermarket custom conversion designed by Evolution Drones. Evolution Drones is not affiliated with, sponsored by, or endorsed by DJI.
Share
